Skip to main content

Microphone Stand – Why it improves your Recordings! Top 4 Reasons

Why You Should Use a Microphone Stand for your Recordings!



The Microphone Stand

A dedicated microphone stand will hold and position your microphone exact as needed. No matter if you are recording at your desk for YouTube or doing music sessions in your studio. The Microphone Stand help your microphone to catch the sound just as and where it should.


Without a quality stand your microphone will catch much more from the sounds surrounding you like clicking, background sounds, thumps, knocks and vibrations that could destroy your recording.


Try not to fall into this trap!

Rode PSA-1 Microphone boom arm scissor - best microphone for YouTube - AccessoryOften the microphone stand falls down to the bottom of the shopping list when you start to equip your home studio.  We recommend to get maybe two stands to get the best out of your recordings. This often saves you tons of time and effort in the post production software, as you do not have to fine-tune your recordings so much.


In common we would recommend to buy a dedicated full length (on floor) Boom Stand like the Samson MK-10 and a good desk solution like our recommended Rode PSA-1.


Indeed, I believe it’s an awesome thought to buy two stands when you purchase your initial two microphones. They’re vital to improve the quality and ease of your recordings.


How to Setup the Microphone Stand

The straight microphone stand isn’t exceptionally adjustable, so your best decision is to have one with a boom arm connected. This kind of stand is otherwise called a microphone boom stand.

The base will normally have a tripod attached, giving it stability. The tripod often has elastic feet which lessen vibrations getting through the floor, as these otherwise will be recorded with your microphone.


The Boom Arm and the microphone boom arm scissor

The boom arm is attached to the straight stand and it gives you a much more prominent way of adjusting the position of your mic. A microphone clasp is then settled to the highest point of the boom arm, and the microphone itself slides into the clasp. The whole arm can then be positioned easily to fit various people and recording environments.

As a result of the adjust-ability the entire construction can give you much more comfort and better sound.


Boom Arm Scissor

Desk-Swivel-Mount-Boom-Arm-Scissor-PSA1-microphone-stand-accessoryThe same principle comes in handy when you use a so called boom arm scissor for your des like our recommended Rode PSA-1. You attach the boom arm scissor (stand) to your desk and can move the microphone out of the way for your all day PC-Work. Whenever you are recording you simply drag it in the perfect position and your are good to go.


Take a look at our recommended Microphone Stands & Mounting Accessories:

Neewer NW 35 – Suspension Boom Scissor Arm

17,99 $ 58,95 $

last updated: January 23, 2019 6:40 pm

DetailsBUY NOW
Pyle-Pro PMKS5 Compact Microphone Stand

19,03 $ 64,99 $

last updated: January 23, 2019 6:40 pm

DetailsBUY NOW
Samson MK-10 Microphone Boom Stand

19,77 $ 72,49 $

last updated: January 23, 2019 6:40 pm

DetailsBUY NOW
RODE PSA1 Swivel Mount Studio Microphone Boom Arm

99,00 $ 109,00 $

last updated: January 23, 2019 6:40 pm

DetailsBUY NOW


Recommended Accessories for Your Microphone Stand
Boom Stand and Boom Arm Scissor

No 1: Pop Filter

Microphone Pop Filter - Microphone Stand accessoryOkay guys – lets be honest. A good Pop-Filter is a must have!
A pop filter (otherwise called a pop shield) can be attached to the boom arm of the stand and is utilized when recording vocals. It’s set between your microphone and the vocalist, and it shields the mic from “popping” sounds that the human voice can create on letters like “p” and ‘b’. It also can prevent the dreaded hissing and lisping sounds that come when pronouncing the letter “S” and make your recording much smoother.


By diminishing the impact of these sounds the recorded vocal take will be cleaner and smoother.

In case will record vocals for any of your ventures, you truly can’t manage without a pop channel. My recommendation is to lift one up when you can.


The picture shows our recommended universal Pop Filter for a whole bunch of microphone stands the Dragonpad USA Pop filter. A cheap but good working wind screen solution.

No 2. Shock Mount

Some microphone models (particularly usb microphones (condenser mics) when used to record vocals) are fixed with a shock mount. A good shock mount lessens low-vibrations (shocks) from the floor, giving you a much cleaner recording of your sound design.

To achieve this, most shock mounts use high elasticity ropes that protect the microphone all-around with the high elasticity wrap roping design. You can check out the Blue Yeti Shock Mount here.


Our Conclusion

If you want to boost your success with your recordings, then great quality sound from your microphone is key. A decent microphone stand is a basic tool for your home studio. I suggest getting no less than one, with a blast arm, so you can move it into the perfect position for every vocal and instrument you record.


Grab a Pop-Filter as well as it is one of the cheapest pieces of gear with the most stunning effect for your recordings.

Thoughts, questions, ideas or your own experience you can share with the community. Just leave us a comment below.


Related Posts

No Comments found

Got a question or an opinion ? Share it with us !

Your email address will not be published. Required fields are marked *